6-Pole Metal Male Trailer Connector Plug Chrome Plated Die Cast 35Amp 1/pk

6-Pole Round Male Plug is the trailer side of a Trailer Connector connection. A corresponding 6-Pole Round Female Socket is mounted on Vehicle side of the connection. These 6-Pole Connectors are typically found on horse or utility trailers equipped with electric brakes. The Male Plug is a chrome plated die cast metal and can be used in any corresponding 6-Pole Female, plastic or metal. To install, loosen set screw and remove terminal assembly. Insert Trailer wires into back of housing, strip 3/8" of insulation and attach to terminals in same position relative to Key as they are in Vehicle Socket. Pull wire assembly back into Plug and tighten set screw. With engine running test all Trailer lighting functions. For trouble shooting check first for good grounds and then using a Circuit Tester test Vehicle Socket wiring to see if Trailer Plug has been wired appropriately. Correct as needed. As different manufactures use different configurations, diagram on instruction sheet may not be accurate.